COMP9315代写代做，代做PostgreSQL程序、代写COMP9315

COMP9315 21T1 Assignment 1

Adding a Set Data Type to PostgreSQL DBMS Implementation

Last updated: Tuesday 9th March 11:05pm

Most recent changes are shown in red;

older changes are shown in brown.

This is a working draft.

Small updates and clarifications will be added as needed.

No major changes are anticipated.

jump to ... summary introduction setup intsets ( values operations representing ) changelog submission

Summary

Deadline

Friday 19 March, 9:00pm

Marks

This assignment contributes 15 marks toward your total mark for this course.

Late Penalty

0.089 marks off the ceiling mark for each hour late.

After 7 days the assignment is worth 0 marks.

Submission

From WebCMS: COMP9315 website, -> Assignments, -> Ass1 Specification, -> Make Submission, -> upload intset.c, intset.source, [<other .c files> Makefile]

From CSE: give cs9315 ass1 intset.c intset.source [<other .c files> Makefile]

Pre-requisites

Before starting this assignment, it would be useful to complete Prac Exercise P04.

This assignment aims to give you:

An understanding of how data is treated inside a DBMS

Practice in adding a new base type to PostgreSQL

The goal is to implement a new data type for PostgreSQL, complete with input/output functions and a range of operations.

Make sure that you read this assignment specification carefully and completely before starting work on the assignment.

Questions which indicate that you haven't done this will simply get the response "Please read the spec".

We will be using the following names in the discussion below:

PG_CODE

The directory where your PostgreSQL source code is located

(typically /srvr/$USER/postgresql-12.5)

PG_HOME

The directory where you have installed the PostgreSQL binaries

(typically /srvr/$USER/pgsql)

PG_DATA

The directory where you have placed PostgreSQL's data

(typically /srvr/$USER/pgsql/data)

PG_LOG

the file to where you send PostgreSQL's log output

(typically /srvr/$USER/pgsql/log)

Introduction

PostgreSQL has an extensibility model which, among other things, provides a well-defined process for adding new data types into a PostgreSQL server.

This capability has led to the development by PostgreSQL users of a number of types (such as polygons) which have become part of the standard distribution.

It also means that PostgreSQL is the Database of choice in research projects which aim to push the boundaries of what kind of data a DBMS can manage.

In this assignment, we will be adding a new data type for dealing with sets of integers.

You may implement the functions for the data type in any way you like, provided that they satisfy the semantics given below.

(in the intSets section)

Note that arrays in PostgreSQL have some properties and operations that make them look a little bit like sets.

However, they are not sets and have quite different semantics to the data type that we are asking you to implement.

The process for adding new base data types in PostgreSQL is described in the following sections of the PostgreSQL documentation:

37.10 C-Language Functions

37.13 User-defined Types

37.14 User-defined Operators

SQL: CREATE TYPE

SQL: CREATE OPERATOR

SQL: CREATE OPERATOR CLASS

Section 37.13 uses an example of a complex number type, which you can use as a starting point for defining your intSet data type (see below). Note that the complex type is a starting point only, to give an idea on how new data types are added. Don't be fooled into thinking that this assignment just requires you to change the name complex to intSet; the intSet type is more complex (no pun intended) than the complex number type.

There are other examples of new data types under the tutorial and contrib directories. These may or may not give you some useful ideas on how to implement the intSet data type:

An auto-encrypted password datatype

PG_CODE/contrib/chkpass/

A case-insensitive character String datatype

PG_CODE/contrib/citext/

A confidence-interval datatype

PG_CODE/contrib/seg/

Setting Up

You ought to start this assignment with a fresh copy of PostgreSQL, without any changes that you might have made for the Prac exercises (unless these changes are trivial).

Note that you only need to configure, compile, and install your PostgreSQL server once for this assignment.

All subsequent compilation takes place in the src/tutorial directory, and only requires modification of the files there.

Once you have re-installed your PostgreSQL server, you should run the following commands:

cd PG_CODE/src/tutorial

cp complex.c intset.c

cp complex.source intset.source

Once you've made the intset files, you should also edit the Makefile in this directory, and add the green text to the following lines:

MODULES = complex funcs intset

DATA_built = advanced.sql basics.sql complex.sql funcs.sql syscat.sql intset.sql

The rest of the work for this assignment involves editing the intset.c and intset.source files.

In order for the Makefile to work properly, you must use the identifier _OBJWD_ in the intset.source file to refer to the directory holding the compiled library.

You should never directly modify the intset.sql file produced by the Makefile.

If you want to use other *.c files Along with intset.c, then you can do so, but you will need to make further changes to the Makefile to ensure that they are compiled and linked correctly into the library.

Note that your submitted versions of intset.c and intset.source should not contain any references to the complex type (because that's not what you're implementing).

Make sure that the comments in the program describes the code that you wrote.

Also, do not put testing queries in your intset.source; all it should do is create the new data type. Put any testing you want to do in a separate *.sql, which you don't need to submit. And do not drop the intSet type at the end of intset.source. If you do, your data type will vanish before we have a chance to test it.

The intSet Data Type

We aim to define a new base type intSet, to store the notion of sets of integer values.

We also aim to define a useful collection of operations on the intSet type.

How you represent intSet values, and implement functions to manipulate them, is up to you.

However, they must satisfy the requirements below

Once implemented correctly, you should be able to use your PostgreSQL server to build the following kind of SQL applications:

create table Features (

id integer primary key,

name text

);

create table DBSystems (

name text primary key,

features intSet

);

insert into Features (id, name) values

(1, 'well designed'),

(2, 'efficient'),

(3, 'flexible'),

(4, 'robust');

insert into DBSystems (name, Features) values

('MySQL', '{}'),

('MongoDB', '{}'),

('Oracle', '{2,4}'),

('PostgreSQL', '{1,2,3,4}');

intSet values

In mathematics, we represent a set as a curly-bracketed, comma-separated collection of values:

{

}

Such a set contains only distinct values, and no particular ordering can be imposed.

Our intSet values can be represented similarly.

We can have a comma-separated list of non-negative integers, surrounded by a set of curly braces, which is presented to and by PostgreSQL as a string.

For example:

'{ 1, 2, 3, 4, 5 }'.

Whitespace should not matter, so '{1,2,3}' and '{ 1, 2, 3 }' are equivalent.

Similarly, a set contains distinct values, so '{1,1,1,1,1}' is equivalent to '{1}'.

And ordering is irrelevant, so '{1,2,3}' is equivalent to '{3,2,1}'.

The integer values in the set are assumed to consist of a sequence of digits. There are no + or - signs.

There can be leading Zeroes, but they should effectively be ignored, e.g. 0001 should be treated the same as 1.

You may not assume a fixed limit to the size of the set.

It may contain zero or more elements, bounded by the database's capacity to store values.

You may assume that each interger value will be less than INT_MAX.

ie. each element in the set will be less than

Valid intSets

'{ }'

'{2,3,1}'

'{6,6,6,6,6,6}'

'{10, 9, 8, 7, 6,5,4,3,2,1}'

'{1, 999, 13, 666, 5}'

'{ 1 , 3 , 5 , 7,9 }'

'{1, 01, 001, 0001}' (same as '{1}')

'{1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20}'

'{1,2,3,4,5,6,7,8,9,10,(and then all numbers to),9999,10000}'

' {1,5,7,9}'

'{2,4,6, 8 } '

'{0}'

Invalid intSets

'{a,b,c}'

'{ a, b, c }'

'{1, 2.0, 3}'

'{1, {2,3}, 4}'

'{1, 2, 3, 4, five}'

'{ 1 2 3 4 }'

'1 2 3 4'

'1 2 3}'

'{ -1 }'

'{1,2,3'

'1,2,3,4,5'

'{{1,2,3,5}'

'{7,17,,27,37}'

'{1,2,3,5,8,}'

Operations on intSets

You must implement all of the Following operations for the intSet type.

(assuming

, and

are intSets, and

is an integer):

i ? S

intSet

contains the integer

;

That is,

∈

# S

Give the Cardinality, or number of distinct elements in, intSet

;

That is,

A >@ B

Does intSet

contain all the values in intSet

ie, for every element of

, is it an Element of

That is, the improper superset (

)

A @< B

Does intSet

contain only values in intSet

ie, for every element of

, is it an element of

That is, the improper subset (

)

A = B

intSets

and

are equal;

That is, intSet

contains all the values of intSet

and intSet

contains all the values of intSet

;

That is, every element in

can be found in

, and vice versa.

A <> B

intSets

and

are not equal;

That is, intSet

doesn't contain all the values of intSet

or intSet

doesn't contain all the Values of intSet

;

That is, some element in

cannot be found in

, or vice versa.

A && B

Takes the set intersection, and produces an intSet containing the elements common to

and

;

That is,

∩

A || B

Takes the set union, and produces an intSet containing all the elements of

and

;

That is,

∪

A !! B

Takes the set disjunction, and produces an intSet containing elements that are in

and not in

or that are in

and not in

A - B

Takes the set difference, and Produces an intSet containing elements that are in

and not in

Note that this is not the same as A !! B.

Below are examples of How you might use intSets, to illustrate the semantics.

You can use these as an initial test set; we will supply a more comprehensive test suite later.

create table mySets (id integer primary key, iset intSet);

CREATE TABLE

insert into mySets values (1, '{1,2,3}');

INSERT 0 1

insert into mySets values (2, '{1,3,1,3,1}');

INSERT 0 1

insert into mySets values (3, '{3,4,5}');

INSERT 0 1

insert into mySets values (4, '{4,5}');

INSERT 0 1

select * from mySets order by id;

id | iset

----+---------

1 | {1,2,3}

2 | {1,3}

3 | {3,4,5}

4 | {4,5}

(4 rows)

-- get all pairs of tuples where the second iset is a subset of first iset

select a.*, b.* from mySets a, mySets b

where (b.iset @< a.iset) and a.id != b.id;

id | iset | id | iset

----+---------+----+-------

1 | {1,2,3} | 2 | {1,3}

3 | {3,4,5} | 4 | {4,5}

(2 rows)

-- insert extra values into the iset in tuple #4 via union

update mySets set iset = iset || '{5,6,7,8}' where id = 4;

UPDATE 1

select * from mySets where id=4;

id | iset

----+-------------

4 | {4,5,6,7,8}

(1 row)

-- tuple #4 is no longer a subset of tuple #3

select a.*, b.* from mySets a, mySets b

where (b.iset @< a.iset) and a.id != b.id;

id | iset | id | iset

----+---------+----+-------

1 | {1,2,3} | 2 | {1,3}

(1 row)

-- get the cardinality (size) of each intSet

select id, iset, (#iset) as card from mySets order by id;

id | iset | card

----+-------------+------

1 | {1,2,3} | 3

2 | {1,3} | 2

3 | {3,4,5} | 3

4 | {4,5,6,7,8} | 5

(4 rows)

-- form the intersection of each pair of sets

select a.iset, b.iset, a.iset && b.iset

from mySets a, mySets b where a.id < b.id;

iset | iset | ?column?

---------+-------------+----------

{1,2,3} | {1,3} | {1,3}

{1,2,3} | {3,4,5} | {3}

{1,2,3} | {4,5,6,7,8} | {}

{1,3} | {3,4,5} | {3}

{1,3} | {4,5,6,7,8} | {}

{3,4,5} | {4,5,6,7,8} | {4,5}

(6 rows)

delete from mySets where iset @< '{1,2,3,4,5,6}';

DELETE 3

select * from mySets;

id | iset

----+-------------

4 | {4,5,6,7,8}

(1 row)

-- etc. etc. etc.

You should think of some more Tests of your own.

In particular, make sure that you check that your code works with large intSets (e.g. cardinality ≥ 1000).

If you come up with any tests that you think are particularly clever, feel free to post them in the comments section below.

Representing intSets

The first thing you need to do is to decide on an internal representation for your intSet data type.

You should do this after you have understood the description of the operators above.

Since what they require may affect how you decide on the representation of your intSet values.

Note that because of the requirement that an intSet can be arbitrarily large (see above),

you cannot have a representation that uses a fixed-size object to hold values of type intSet.

When you read strings representing intSet values, they are converted into your internal form,

stored in the database in this form, and operations on intSet values are carried out using this data structure.

When you display intSet values, you should show them in a canonical form, regardless of how they were entered or how they are stored.

The canonical form for output (at least) should include no spaces, and should have elements in ascending order.

The first functions you need to write are ones to read and display values of type intSet.

You should write analogues of the functions complex_in() and complex_out() that are defined in the file complex.c.

Suitable names for these functions would be e.g.

intset_in() and intset_out().

Make sure that you use the V1 style function interface (as is done in complex.c).

Note that the two input/output Functions should be complementary, meaning that any string displayed by the output function must be able to be read using the input function.

There is no requirement for you to retain the precise string that was used for input

(e.g. you could store the intSet value internally in canonical form).

Note that you are not required to define binary input/output functions called receive_function and send_function in the PostgreSQL documentation, and called complex_send() and complex_recv() in the complex.c file.

Hint: test out as many of your C functions as you can outside PostgreSQL

(e.g., write a simple test driver)

Before you try to install them in PostgreSQL.

This will make debugging much easier.

You should ensure that your definitions capture the full semantics of the operators

(e.g. specify commutativity if the operator is commutative).

ChangeLog

v1.0 (2021-02-26 15:00:00+10:00)

released Assignment 1

v1.1 (2021-02-27 11:00:00+10:00)

Modify the "Operations on intSets" section

Change the symbol for "contains" from '<@' to '?'

Change the symbol for "Cardinality" from '@' to '#'

Change the symbol for "Subset" from '@>' to '@<'

Add the "superset" Operation, using the '>@' symbol

Add the "inequality" operation, using the '<>' symbol

v1.2 (2021-02-26 16:00:00+10:00)

Corrected typo in examples of Valid IntSets

Add addidtional examples of (In)Valid IntSets

Add an upper bound for the size of each element in an IntSet

v1.3 (2021-02-26 18:00:00+10:00)

Correct Superset and subset symbles used in "Operations on intSets"

v1.4 (2021-03-01 18:00:00+10:00)

Moved deadline forward to 9pm to be consistent with CSE policy

Submission

You need to submit two files:

intset.c - containing the C functions that implement the internals of the intSet data type.

intset.source - containing the Template SQL commands to install the intSet data type into a PostgreSQL server.

Do not submit the intset.sql file, since it contains absolute file names which are not useful in our test environment.

If your system requires other *.c files, you should submit them, along with the modified Makefile from the src/tutorial directory.

Do not include:

create table ...

insert into ...

select ...

drop type ...

Or any other statements not Directly needed for creating the intSet data type in intset.source.

Have fun, jas and dylan.

如有需要，请加QQ：99515681 或WX：codehelp

IT界

珠穆朗玛网 > 科技 > IT界 >

COMP9315代写代做，代做PostgreSQL程序、代写COMP9315

频道精选

最火资讯